[Carbon-commits] [Carbon] svn commit r111057 - trunk/carbon/build/setup/stratos/repository/conf

damitha at wso2.com damitha at wso2.com
Sat Jul 30 02:12:41 EDT 2011


Author: damitha
Date: Fri Jul 29 23:12:40 2011
New Revision: 111057
URL: http://wso2.org/svn/browse/wso2?view=rev&revision=111057

Log:


Added:
   trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml
   trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml
   trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml
   trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml

Added: trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml	Fri Jul 29 23:12:40 2011
@@ -0,0 +1,299 @@
+<!--
+  ~ Copyright 2005-2007 WSO2, Inc. (http://wso2.com)
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~ http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<axisconfig name="AxisJava2.0">
+    <!-- ================================================= -->
+    <!-- Parameters -->
+    <!-- ================================================= -->
+    <parameter name="hotdeployment">true</parameter>
+    <parameter name="hotupdate">false</parameter>
+    <parameter name="enableMTOM">false</parameter>
+
+    <!-- commons-http-client defaultMaxConnPerHost -->
+    <parameter name="defaultMaxConnPerHost">500</parameter>
+    <!-- commons-http-client maxTotalConnections -->
+    <parameter name="maxTotalConnections">15000</parameter>
+
+    <!--If turned on with use the Accept header of the request to determine the contentType of the
+    response-->
+    <parameter name="httpContentNegotiation">false</parameter>
+
+    <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
+    <!--that behaviour.-->
+    <parameter name="sendStacktraceDetailsWithFaults">true</parameter>
+
+    <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
+    <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
+    <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
+    <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
+    <parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
+
+    <!--This is the user name and password of admin console-->
+    <parameter name="userName">admin</parameter>
+    <parameter name="password">axis2</parameter>
+
+    <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
+    <!--ServicesDirectory only works on the following cases-->
+    <!---File based configurator and in that case the value should be a file URL (http:// not allowed)-->
+    <!---When creating URL Based configurator with URL “file://”  -->
+    <!--- War based configurator with expanded case , -->
+
+    <!--All the other scenarios it will be ignored.-->
+    <!--<parameter name="ServicesDirectory">service</parameter>-->
+    <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
+    <!--<parameter name="ModulesDirectory">modules</parameter>-->
+
+    <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
+    <!--root which can configured using the following contextRoot parameter-->
+    <!--<parameter name="contextRoot">axis2</parameter>-->
+
+    <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
+    <!--<parameter name="servicePath">services</parameter>-->
+    <!--<parameter name="restPath">rest</parameter>-->
+
+    <!-- Following parameter will completely disable REST handling in Axis2-->
+    <parameter name="disableREST" locked="false">false</parameter>
+
+    <!--POJO deployer , this will alow users to drop .class file and make that into a service-->
+    <deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/>
+
+    <!-- Following parameter will set the host name for the epr-->
+    <!--<parameter name="hostname" locked="true">myhost.com</parameter>-->
+
+    <!-- ================================================= -->
+    <!-- Message Receivers -->
+    <!-- ================================================= -->
+    <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
+    <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
+    <!--any operation -->
+    <!--Note : You can override this for particular service by adding the same element with your requirement-->
+    <messageReceivers>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
+                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
+        <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
+                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
+        <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
+                         class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
+        <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
+                         class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
+    </messageReceivers>
+
+    <!-- ================================================= -->
+    <!-- Message Formatter -->
+    <!-- ================================================= -->
+    <!--Following content type to message formatter mapping can be used to implement support for different message -->
+    <!--format  serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
+    <messageFormatters>
+        <messageFormatter contentType="application/x-www-form-urlencoded"
+                          class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
+        <messageFormatter contentType="multipart/form-data"
+                          class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
+        <messageFormatter contentType="application/xml"
+                          class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
+        <messageFormatter contentType="text/xml"
+                          class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
+        <messageFormatter contentType="application/soap+xml"
+                          class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
+	<!--JSON Message Formatters-->
+        <messageFormatter contentType="application/json"
+                          class="org.apache.axis2.json.JSONMessageFormatter"/>
+        <messageFormatter contentType="application/json/badgerfish"
+                          class="org.apache.axis2.json.JSONBadgerfishMessageFormatter"/>
+        <messageFormatter contentType="text/javascript"
+                          class="org.apache.axis2.json.JSONMessageFormatter"/>
+    </messageFormatters>
+
+    <!-- ================================================= -->
+    <!-- Message Builders -->
+    <!-- ================================================= -->
+    <!--Following content type to builder mapping can be used to implement support for different message -->
+    <!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
+    <messageBuilders>
+        <messageBuilder contentType="application/xml"
+                        class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
+        <messageBuilder contentType="application/x-www-form-urlencoded"
+                        class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
+	<!--JSON Message Builders-->
+        <messageBuilder contentType="application/json"
+                        class="org.apache.axis2.json.JSONOMBuilder"/>
+        <messageBuilder contentType="application/json/badgerfish"
+                        class="org.apache.axis2.json.JSONBadgerfishOMBuilder"/>
+        <messageBuilder contentType="text/javascript"
+                        class="org.apache.axis2.json.JSONOMBuilder"/>
+        <!--Left commented because it adds the depandancy of servlet-api to other modules.
+        Please uncomment to Receive messages in multipart/form-data format-->
+        <!--<messageBuilder contentType="multipart/form-data"-->
+        <!--class="org.apache.axis2.builder.MultipartFormDataBuilder"/>-->
+    </messageBuilders>
+
+    <!-- ================================================= -->
+    <!-- Target Resolvers -->
+    <!-- ================================================= -->
+    <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
+    <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
+    <!-- choose a server in a cluster -->
+    <!--<targetResolvers>-->
+    <!--<targetResolver class="" />-->
+    <!--</targetResolvers>-->
+
+
+    <!-- ================================================= -->
+    <!-- Transport Ins -->
+    <!-- ================================================= -->
+    <transportReceiver name="http"
+                       class="org.apache.axis2.transport.http.SimpleHTTPServer">
+        <parameter name="port">6071</parameter>
+        <!--If you want to give your own host address for EPR generation-->
+        <!--uncomment following parameter , and set as you required.-->
+        <!--<parameter name="hostname">http://myApp.com/ws</parameter>-->
+    </transportReceiver>
+
+    <!--Uncomment if you want to have TCP transport support-->
+    <!--<transportReceiver name="tcp"
+                       class="org.apache.axis2.transport.tcp.TCPServer">
+        <parameter name="port">6061</parameter>-->
+    <!--If you want to give your own host address for EPR generation-->
+    <!--uncomment following parameter , and set as you required.-->
+    <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
+    <!--</transportReceiver>-->
+
+    <!-- ================================================= -->
+    <!-- Transport Outs -->
+    <!-- ================================================= -->
+
+    <!--<transportSender name="jms"-->
+    <!--class="org.apache.axis2.transport.jms.JMSSender"/>-->
+    <transportSender name="tcp"
+                     class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
+    <transportSender name="local"
+                     class="org.apache.axis2.transport.local.LocalTransportSender"/>
+    <transportSender name="http"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding">chunked</parameter>
+        <parameter name="SO_TIMEOUT">60000</parameter>
+        <parameter name="CONNECTION_TIMEOUT">60000</parameter>
+    </transportSender>
+    <transportSender name="https"
+                     class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+        <parameter name="PROTOCOL">HTTP/1.1</parameter>
+        <parameter name="Transfer-Encoding">chunked</parameter>
+        <parameter name="SO_TIMEOUT">60000</parameter>
+        <parameter name="CONNECTION_TIMEOUT">60000</parameter>
+    </transportSender>
+    <!--<transportSender name="java"-->
+    <!--class="org.apache.axis2.transport.java.JavaTransportSender"/>-->
+
+
+    <!-- ================================================= -->
+    <!--  SOAP Role Configuration                          -->
+    <!-- ================================================= -->
+    <!-- Use the following pattern to configure this axis2
+         instance to act in particular roles. Note that in
+         the absence of any configuration, Axis2 will act 
+         only in the ultimate receiver role -->
+    <!--
+    <SOAPRoleConfiguration isUltimateReceiver="true">
+    	<role>http://my/custom/role</role>
+    </SOAPRoleConfiguration>
+	-->
+
+    <!-- ================================================= -->
+    <!-- Phases  -->
+    <!-- ================================================= -->
+    <phaseOrder type="InFlow">
+        <!--  System pre-defined phases       -->
+        <phase name="Transport">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
+                <order phase="Transport"/>
+            </handler>
+        </phase>
+        <phase name="Addressing">
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
+                <order phase="Addressing"/>
+            </handler>
+        </phase>
+        <phase name="Security"/>
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
+            <handler name="RequestURIOperationDispatcher"
+                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
+
+            <handler name="HTTPLocationBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
+        </phase>
+        <phase name="RMPhase"/>
+        <!--  System pre defined phases       -->
+        <!--   After Postdispatch phase module author or or service author can add any phase he want      -->
+        <phase name="OperationInPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutPhase"/>
+        <!--system predefined phase-->
+        <!--these phase will run irrespective of the service-->
+        <phase name="RMPhase"/>
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+        <phase name="Security"/>
+    </phaseOrder>
+    <phaseOrder type="InFaultFlow">
+        <phase name="Addressing">
+            <handler name="AddressingBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
+                <order phase="Addressing"/>
+            </handler>
+        </phase>
+        <phase name="Security"/>
+        <phase name="PreDispatch"/>
+        <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+            <handler name="RequestURIBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
+            <handler name="SOAPActionBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
+            <handler name="RequestURIOperationDispatcher"
+                     class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
+            <handler name="SOAPMessageBodyBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
+
+            <handler name="HTTPLocationBasedDispatcher"
+                     class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
+        </phase>
+        <phase name="RMPhase"/>
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationInFaultPhase"/>
+    </phaseOrder>
+    <phaseOrder type="OutFaultFlow">
+        <!--      user can add his own phases to this area  -->
+        <phase name="OperationOutFaultPhase"/>
+        <phase name="RMPhase"/>
+        <phase name="PolicyDetermination"/>
+        <phase name="MessageOut"/>
+        <phase name="Security"/>
+    </phaseOrder>
+</axisconfig>

Added: trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml	Fri Jul 29 23:12:40 2011
@@ -0,0 +1,52 @@
+<!--
+  ~ Copyright 2005-2007 WSO2, Inc. (http://wso2.com)
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~ http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<eventBroker xmlns="http://wso2.org/ns/2009/09/eventing">
+    <eventStream name="RegistryEventBroker">
+        <subscriptionManager class="org.wso2.carbon.event.broker.subscriptions.EmbeddedRegistryBasedSubscriptionManager">
+            <parameter name="topicHeaderName">topic</parameter>
+            <parameter name="topicHeaderNS">http://wso2.org/ns/2009/09/eventing/notify</parameter>
+            <parameter name="subscriptionStoragePath">/repository/components/org.wso2.carbon.event</parameter>
+        </subscriptionManager>
+        <!-- Uncomment to to RemoteRegistryBasedSubscriptionManager -->
+        <!--subscriptionManager class="org.wso2.carbon.event.broker.subscriptions.RemoteRegistryBasedSubscriptionManager">
+            <parameter name="topicHeaderName">topic</parameter>
+            <parameter name="topicHeaderNS">http://wso2.org/ns/2009/09/eventing/notify</parameter>
+            <parameter name="subscriptionStoragePath">/repository/components/org.wso2.carbon.event</parameter>
+            <parameter name="registryURL">http://remote-ip:port/registry/</parameter>
+            <parameter name="username">username</parameter>
+            <parameter name="password">password</parameter>
+        </subscriptionManager-->
+        <eventDispatcher>org.wso2.carbon.registry.eventing.RegistryEventDispatcher</eventDispatcher>
+        <notificationManager class="org.wso2.carbon.event.broker.CarbonNotificationManager">
+            <parameter name="minSpareThreads">25</parameter>
+            <parameter name="maxThreads">150</parameter>
+            <parameter name="maxQueuedRequests">100</parameter>
+            <!-- Keep Alive time in nano seconds -->
+            <parameter name="keepAliveTime">1000</parameter>
+            <!-- Specify path of security policy file to enable security. -->
+            <!--parameter name="securityPolicy">policypath</parameter-->
+
+            <!-- Parameters specific to the Registry Event Broker configuration -->
+            <!-- Set this as false to disable displaying of registry URL in notification e-mails -->
+            <parameter name="showRegistryURL" locked="true">true</parameter>
+            <!-- Set this to print the powered-by message in notification e-mails. -->
+            <parameter name="registryPoweredBy" locked="true">This message is automatically generated by the ${product.name}.</parameter>
+            <!-- Set this to customize the URL printed in notification e-mails. -->
+            <!--parameter name="registryURL" locked="true">https://localhost:9443/carbon/</parameter-->
+        </notificationManager>
+    </eventStream>
+</eventBroker>

Added: trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml	Fri Jul 29 23:12:40 2011
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<config>
+   <TCP bind_port="7800"/>
+   <S3_PING secret_access_key="replace with your secret access key" access_key="replace with your access key"
+            location="replace with your s3 bucket name"/>
+   <MERGE2 max_interval="30000" min_interval="10000"/>
+   <FD_SOCK/>
+   <FD timeout="10000" max_tries="5"/>
+   <VERIFY_SUSPECT timeout="1500"/>
+   <pbcast.NAKACK use_mcast_xmit="false" gc_lag="0" retransmit_timeout="300,600,1200,2400,4800"
+                  discard_delivered_msgs="true"/>
+   <UNICAST timeout="300,600,1200,2400,3600"/>
+   <pbcast.STABLE stability_delay="1000" desired_avg_gossip="50000" max_bytes="400000"/>
+   <VIEW_SYNC avg_send_interval="60000"/>
+   <pbcast.GMS print_local_addr="true" join_timeout="60000" view_bundling="true"/>
+   <FC max_credits="20000000" min_threshold="0.10"/>
+   <FRAG2 frag_size="60000"/>
+   <pbcast.STATE_TRANSFER/>
+   <pbcast.FLUSH timeout="0"/>
+</config>

Added: trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml	Fri Jul 29 23:12:40 2011
@@ -0,0 +1,123 @@
+<!--
+  ~ Copyright 2005-2007 WSO2, Inc. (http://wso2.com)
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~ http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<!--
+  ~ This file contains the configuration of the transport connectors used by
+  ~ the embedded application server instance which hosts the Carbon management
+  ~ console
+  -->
+
+<transports>
+
+    <!--
+       HTTP Transport configuration. The configuration parameters are same as those of the Tomcat 7
+       HTTP Connector configuration. For more details on config parameters see
+       http://tomcat.apache.org/tomcat-7.0-doc/config/http.html
+    -->
+    <transport name="http" class="org.wso2.carbon.server.transports.http.HttpTransport">
+        <!--
+           The Tomcat connector protocol to be used. Valid values are;
+
+           1. HTTP_11
+           2. HTTP_11_NIO
+           3. HTTP_11_APR
+        -->
+        <parameter name="protocol">HTTP_11_NIO</parameter>
+
+        <!-- ${Ports.ServletTransports.HTTP} is defined in the Ports section of the carbon.xml -->
+        <parameter name="port">${Ports.ServletTransports.HTTP}</parameter>
+
+        <!--
+       Uncomment the following to enable Apache2 mod_proxy. The port on the Apache server is 80
+       in this case. 
+        -->
+        <!--<parameter name="proxyPort">80</parameter>-->
+
+        <!--<parameter name="address">127.0.0.1</parameter>-->
+        <parameter name="maxHttpHeaderSize">8192</parameter>
+        <parameter name="acceptorThreadCount">2</parameter>
+        <parameter name="maxThreads">250</parameter>
+        <parameter name="minSpareThreads">50</parameter>
+        <parameter name="disableUploadTimeout">false</parameter>
+        <parameter name="connectionUploadTimeout">120000</parameter>
+        <parameter name="maxKeepAliveRequests">200</parameter>
+        <parameter name="acceptCount">200</parameter>
+        <parameter name="server">WSO2 Carbon Server</parameter>
+
+        <parameter name="compression">on</parameter>
+        <parameter name="compressionMinSize">2048</parameter>
+        <parameter name="noCompressionUserAgents">gozilla, traviata</parameter>
+        <parameter name="compressableMimeType">
+            text/html,text/javascript,application/x-javascript,application/javascript,application/xml,text/css,application/xslt+xml,text/xsl,image/gif,image/jpg,image/jpeg
+        </parameter>
+    </transport>
+
+    <!--
+       HTTPS Transport configuration. The configuration parameters are same as those of the Tomcat 7
+       HTTPS Connector configuration. For more details on config parameters see
+       http://tomcat.apache.org/tomcat-7.0-doc/config/http.html
+    -->
+    <transport name="https" class="org.wso2.carbon.server.transports.http.HttpTransport">
+
+        <!--
+           The Tomcat connector protocol to be used. Valid values are;
+
+           1. HTTPS_11
+           2. HTTPS_11_NIO
+           3. HTTPS_11_APR
+        -->
+        <parameter name="protocol">HTTPS_11_NIO</parameter>
+
+        <!-- ${Ports.ServletTransports.HTTPS} is defined in the Ports section of the carbon.xml -->
+        <parameter name="port">${Ports.ServletTransports.HTTPS}</parameter>
+
+        <!--
+       Uncomment the following to enable Apache2 mod_proxy. The port on the Apache server is 443
+       in this case. 
+        -->
+        <!--<parameter name="proxyPort">443</parameter>-->
+        <!--
+       Uncomment the following to run on IBM J9 VM. Also, change the sslProtocol to SSL from the
+       Default value of TLS.
+        -->
+        <!--<parameter name="algorithm">IbmX509</parameter>-->
+        <parameter name="sslProtocol">TLS</parameter>
+        <!--<parameter name="address">127.0.0.1</parameter>-->
+        <parameter name="maxHttpHeaderSize">8192</parameter>
+        <parameter name="acceptorThreadCount">2</parameter>
+        <parameter name="maxThreads">250</parameter>
+        <parameter name="minSpareThreads">50</parameter>
+        <parameter name="enableLookups">false</parameter>
+        <parameter name="disableUploadTimeout">false</parameter>
+        <parameter name="connectionUploadTimeout">120000</parameter>
+        <parameter name="maxKeepAliveRequests">200</parameter>
+        <parameter name="acceptCount">200</parameter>
+        <parameter name="server">WSO2 Carbon Server</parameter>
+
+        <parameter name="clientAuth">false</parameter>
+
+        <parameter name="compression">on</parameter>
+        <parameter name="compressionMinSize">2048</parameter>
+        <parameter name="noCompressionUserAgents">gozilla, traviata</parameter>
+        <parameter name="compressableMimeType">
+            text/html,text/javascript,application/x-javascript,application/javascript,application/xml,text/css,application/xslt+xml,text/xsl,image/gif,image/jpg,image/jpeg
+        </parameter>
+        <parameter name="keystoreFile">
+            ${carbon.home}/repository/resources/security/wso2carbon.jks
+        </parameter>
+        <parameter name="keystorePass">wso2carbon</parameter>
+    </transport>
+</transports>


More information about the Carbon-commits mailing list